Senarai Notebook/Leptop yang menyokong hackintosh

Berikut saya kongsikan senarai Notebook/laportop yang menyokong pemasangan hackintosh dengan baik . Namun ianya bukan hasil cubaan dan ujian saya. Ianya bersumberkan Laman-lamah hackintosh yang lain

1. HP Prook 4540s

Berfungsi : sound, graphics, power management, sleep mode, the HDMI port, HDMI audio, the battery meter, USB 3.0, USB 2.0, ethernet, and multi-touch gestures pada  trackpad.

Tak berfungsi : Wifi 

Tak Stabil :  Port Vga ,Camera dan kecerahan screen 

2. HP Probook 6470b dan 6570b

3.Lenovo ideapad u310 atau u410

4.Lenovo G580

5.Acer Aspire S3-391

Kesimpulan : Kebanyakan Notebook di atas berfungsi namun anda perlu menukar wifi adapter dan Bluetooth yang berfungsi dengan baik pada mac .

Motherboard hackintosh yang aku gunakan

Motherboard atau papaninduk amat penting dalam pemilihan anda membuat hackintosh anda.  Aku telah mengunakan MB sedia ada tetapi telah di kemaskini bios framware yang terkini untuk menyokong pemasangan hackintosh . Model yg aku guna tidaklah sepower man namun mampu rander video  dengan baik. Malah keputusan rander video lebih baik berbanding mengunakan windows (dengan Board dan pc yang sama).

Model : Intel DH61WW
Prosesor : i5 ( Wajib Upgrade bios Framware terbaru kerana framware lama hanya sapport sehingga core 2 sahaja)

Sekadar berkongsi Video yg saya gunakan

Kemaskini bios anda di sini

http://www.intel.com/content/www/us/en/motherboards/desktop-motherboards/desktop-board-dh61ww.html

Wifi Adapter Network Card

Pada yang berminat untuk memasang wifi adapter pada pc hackinosh anda . wireless kad ini mudah untuk di dapati di malaysia. 100% berfungsi tanpa perlu apa2 perubahan pada keyx dan bootloader  hackintos anda ..

Saya telah mengunakan tanpa masalah pada versi terbaru 10.9.2 

Boot Flag yang boleh di gunakan .

Chimera Boot Options

DropSSDT=Yes | No

Skip the SSDT tables while relocating the ACPI tables [Default No]

DSDT=<file>

Use an alternate DSDT.aml file [Defaults /DSDT.aml /Extra/DSDT.aml bt(0,0)/Extra/DSDT.aml]

RestartFix=Yes | No

If disabled, no FACP patch will be done at boot time. [Default Yes]

CSTUsingSystemIO=Yes | No

GenerateCStates=Yes | No

Enable auto generation of processor idle sleep states [Default Yes]

GeneratePStates=Yes | No

Enable auto generation of processor power performance states [Default Yes]

EnableC2State=Yes | No

Enable specific Processor power state, C2 [Default No]

EnableC3State=Yes | No

Enable specific Processor power state, C3 [Default No]

EnableC4State=Yes | No

Enable specific Processor power state, C4 [Default No]

Wake=Yes | No

Disable wake up after hibernation [Default Yes]

ForceWake=Yes | No

Force using the sleepimage [Default No]

WakeImage=<file>

Use an alternate sleepimage file. [Default /private/var/vm/sleepimage]

busratio=<n>

Force busratio multiplier, such as CPUFreq=FSB freq x busratio

device-properties

Sets additional device properties like gfx card efi injection, network

"Default Partition"=hd(<x>,<y>) | <uuid> | <label>

Sets the default boot partition, Specified as a disk/partition pair, an uuid, or a label enclosed in quotes [No default]

"Hide Partition"="<partition>[;<partition2>...]"

Remove unwanted partition(s) from the boot menu. Specified, possibly multiple times, as hd(x,y), an uuid or label enclosed in quotes [No default]

"Rename Partition"="<partition> <alias>[;<partition2> <alias2>...]"

Rename partition(s) for the boot menu. Where partition is hd(x,y), uuid or label enclosed in quotes. The alias can optionally be quoted too. [No default]

SMBIOS=<file>

Use an alternate SMBIOS.plist file [Defaults /Extra/SMBIOS.plist bt(0,0)/Extra/SMBIOS.plist]

SMBIOSdefaults=Yes | No

Don't use the default values for smbios.plist [Default No]

SystemId=<uuid>

Manually set the system id uuid, overriding SMuuid in smbios config [No Default]

SystemType=<0-6>

Set the system type [Default 1]

UseMemDetect=Yes | No

PCIRootUID=0 | 1

Use an alternate value for PciRoot [Default 0]

AtiPorts=<0-6>

Change the number of graphics ports reported to OSX

AtiConfig=<framebuffer_personality>

Use a different framebuffer personality [No default]

UseAtiROM=Yes | No

Use an alternate Ati ROM image with path /Extra/<vendorid>_<devid>_<subsysid>.rom [Default No]

ATYbinimage=<file>

UseNvidiaROM=Yes | No

Use an alternate Nvidia ROM image with path /Extra/<vendorid>_<devid>.rom [Default No]

VBIOS=Yes | No

Inject NVIDIA VBIOS into device-properties [Default No]

display_0

display_1

EthernetBuiltIn=Yes | No

Automatic device-properties generation for ethernet interfaces [Default Yes]

GraphicsEnabler=Yes | No

Automatic device-properties generation for gfx cards [Default Yes]

ForceHPET=Yes | No

Force Enable HPET [Default No]

md0=<file>

Load raw img file into memory for use as XNU's md0 ramdisk [Default /Extra/Postboot.img]

USBBusFix=Yes | No

Enable all of the USB fixes [Default No]

EHCIacquire=Yes | No

Enable the EHCI fix [Default No]

UHCIreset=Yes | No

Enable the UHCI fix [Default No]

USBLegacyOff=Yes | No

Enable the USB Legacy fix [Default No]

EHCIhard=Yes | No

Kernel Flags

cpus=<n>

Force physical cpus count (all cores in all cpus), use only if autodetection doesn't work

darkwake=0 | 1

npci=0x<hex><hex><hex><hex>

Governs the initialization order and method of the PCI bus [Default 0x3000]

AHCIDisk=<n>

Increases AHCI debugging level, usually "1" when OS X boots too quickly [Default 0]

dart=0 | 1

Enables or disables extended memory mapping [Default 0]

nv_disable=0 | 1

Disables QE/CI on nVidia graphics cards [Default 0]

rtc=<0-7>

Real Time Clock debugging level, use 7 for an RTC dump to the kernel log

Kad Grafik Yang Di sokong

Integrated

Manufacturer	Model	QE/CI	Method / Notes
Intel	(X)4500(HD) (Eaglelake)	No	Works OOB without kext (no QE/CI). Edit sample: "com.apple.Boot.plist" <key>Graphics Mode</key><string>1280x1024x32</string> <key>GraphicsEnabler</key><string>Yes</string>
Intel	4500MHD (Cantiga)	No	Works OOB without kext (no QE/CI). Edit sample: "com.apple.Boot.plist" <key>Graphics Mode</key><string>1280x1024x32</string> <key>GraphicsEnabler</key><string>Yes</string>
Intel	HD (Ironlake)	No	10.6.5-10.6.8 and 10.7.0-10.7.1 (even on Installation boot) will hang on boot, rename/remove AppleIntelHDGraphics.kext, and AppleIntelHDGraphicsFB.kext from /S/L/E.
Intel	HD (Sandy Bridge)
Intel	HD 2000	No	Can enable full resolution in Mac OS X Lion, but no graphics acceleration (QE/CI)
Intel	HD 3000	Yes	Works with Chimera 1.5 in Lion
Intel	HD 2500
Intel	HD 4000
Intel+NVIDIA	Integrated + GT210M	No	Cannot force NVIDIA graphics, stuck on Intel (1024x768) which is currently unsupported

ATI

Manufacturer	Model	QE/CI	Method / Notes
Asus	4670 ATI Radeon HD EAH4670/DI/1GD3/A	Yes	Device ID=0x9490 OSX 10.6.7 Multibeast 3.4 iBoot ?.?
Asus	4670 ATI Radeon HD EAH4670/DI/1GD3/V2	Yes	Device ID=?x??? OSX 10.?.? Multibeast ?.? iBoot ?.?
Asus	5770 ATI Radeon HD EAH5770 FORMULA	Yes	Device ID=0x68BE OSX 10.6.7 Multibeast 3.4 iBoot ?.?. You have to add card DeviceID to version.plist inside ATI5000Controller.kext as 0x68BE1002
Asus	5770 ATI Radeon HD EAH5770 CuCore/2DI/1GD5	Yes	Device ID=?x??? OSX 10.6.7 Multibeast 3.4 iBoot ?.?
Asus	6850 AMD Radeon HD EAH6850 DC/2DIS/1GD5/V2	Yes	Device ID-0x6739 OSX 10.6.7 Multibeast 3.4 iBoot ?.?
Asus	6870 AMD Radeon HD EAH6870/2DI2S/1GD5	Yes	Device ID-0x6738 OSX 10.6.7 Multibeast 3.4 iBoot ?.?
Biostar	4670 ATI Radeon HD DVI/VGA	Yes	Device ID-0x9490 OSX 10.7.x Multibeast 4.1, use GraphicsEnablers=Yes, Snow leopard uses kext editing
Club 3D	4850 ATI Radeon HD CGAX-48524I DVI/VGA/HDMI	No	Not tested in DVI. Safe mode only, tried all drivers available in 10.6.0/2/3. Strange colors on display with stripes all over. Graphics Enabler=Yes results in kernel panic, -pci1 PciRoot=1 (or 0) don't work either.
Club 3D	5570 ATI Radeon HD CGAX-557241	Yes	Installed Lion 10.7.3 with Unibeast and selected Easy Beast in Multibeast settings. Working great in dual screen on HDMI and VGA ports. But the HDMI is considered as VGA and won't go into sleep mode...
Diablotek	5770 ATI Radeon HD VX5770 1GBD5-H	Yes	Device ID-0x68B8 OSX 10.6.7 Multibeast 3.4 iBoot ?.?
Diamond	5870 ATI Radeon HD 5870PE51G	Yes	Device ID=0x9898 OSX 10.6.6 Multibeast 3.4 iBoot ?.?
Diamond	6850 AMD Radeon HD VCX-DMD-6850PE51G	Yes	Device ID-0x6739 OSX 10.6.7 Multibeast 3.4 iBoot ?.?
Gigabyte	4850 ATI Radeon HD 1GB Dual DVI	Yes	Check this page
Gigabyte	5670 ATI Radeon HD 1GB GDDR5	Yes	iBoot 2.5.(4?) + MultiBeast on 10.6.6. DVI+VGA work at max res, HDMI not tested, 64bit OK. Boot with: kabyl boot file + 5670 ROM + edit "com.apple.Boot.plist" with (GraphicsEnabler=Yes, arch=x86_64, useAtiROM=Yes, AtiConfig=Baboon). More details and downloads check this, it constantly updates and my build was already not the latest one (25Jan2011).
Gigabyte	5750 ATI Radeon HD GV-R575SL-1GI	Yes	Device ID=0x68BE OSX 10.6.7 Multibeast 3.4 iBoot ?
Gigabyte	5770 ATI Radeon HD GV-R577UD-1GD	Yes	Device ID-0x68B8 OSX 10.6.7 Multibeast 3.2 iBoot 2.7/ ATI drivers from 3.4 using Notshy's method FrameBuffer=Vervet / ATI Experimental Chameleon Boot - MultiBeast 3.3.0 - GraphicsEnabler=Yes - 64 bit=YES!!
Gigabyte	5870 ATI Radeon HD GV-R587OC-1GD	Yes	iBoot ATI 5XXX-3 + GraphicsEnabler=No. DVI, HDMI work great / Experimental ATI Chameleon + Graphics Enabler = Yes. Works in 64 bit mode
Gigabyte	6850 AMD Radeon HD GV-R685OC-1GD	Yes	Device ID=0x6739, OSX 10.6.8/Lion, Chameleon v2.1svn r1713, DVI, HDMI , DP work great, GraphicsEnabler=Yes, <Ati Config> Framebuffer=Bulrushes; AtiPorts=4 64bits
Gigabyte	6870 AMD Radeon HD GV-R687OC-1GD	Yes	Device ID=0x6738 OSX 10.6.7 Multibeast 3.4 iBoot Legacy MB ATI drivers & Andy's ATI patch Framebuffer=Duckweed
HIS	4350 ATI Radeon HD	Yes	Device ID=0x954f Tested in Snow Leopard OSX 10.68 *combo update v.1.1 and Mac OSX Lion 10.7-10.7.2 using Multibeast 4.02KernelCache option "No". You have to add card DeviceID to Info.plist inside ATI4600Controller.kext as 0x954F1002 or you can copy from uploaded in this link and install ATY_Init.kext into /System/Library/Extensions. make sure npci=0x2000 is also inside yourorg.chameleon.Boot.plist example in this link. then put ATI4350.Fix.v2.kext from the zip files inside /Extra/Extension Do not forget always repair permissions before reboot. Use Kext utility appropriate with OSX will make it easier. *credits to alexmathayes. After success loading with full acceleration, to make Lion boot faster with cache, type this command inside terminal , because if we useKernelCache option on org.chameleon.Boot.plist value into "Yes" it will not work. All VGA port working, VGA, DVI, HDMI *unless audio hdmi.
HIS	5770 ATI Radeon HD H577FK1GD - Juniper XT	Yes	iBoot 2.5.1 + Multibeast 2.3.0 + ATY_Init Vervet enabler + GraphicsEnabler=No. Dual DVI works. HDMI not tested. Display Port not tested. Also see this guide.
HIS	4890 ATI Radeon HD 1GB DDR5	Yes	Lion 10.7.0/10.7.2 UniBeast + QE/CI Patch by Netkas
HIS	5870 ATI Radeon HD (Cypress)	Yes	Device ID=0x6898 OSX 10.7.2 Unibeast 1.0.0 Multibeast 4.1.0. Needs ATIConfig Uakari so dual monitors can work (with both DVI ports. HDMI not tested)
HIS	6570 AMD Radeon HD 2GB	Yes	Lion with GE=Yes gives HDMI<->HDMI only (add AtiConfig=Muskgrass, AtiPorts=4 for DVI over HDMI port)
HIS	6850 AMD Radeon HD H685QN1GD	Yes	(OS X 10.7.2/Lion; UniBeast 1.0.0 Multibeast 4.2.1) AtiConfig=Duckweed Display Port and upper DVI work properly, DVD Player, ripples in widgets; AtiConfig=Mangabey both DVI ports work (because card not recognized at all), ripple in widgets but no DVD Player; other ports not tested
HIS	6870 AMD Radeon HD H687F1G2M	Yes	Device ID=0x6738 OSX 10.6.7 Multibeast ?.? iBoot ?.? Andy's ATI fix, Framebuffer=Duckweed
MSI	5670 ATI Radeon HD R5670-PMD1G OC	Yes	Device ID=0x68D8 OSX 10.6.7 Multibeast 3.4 iBoot ?.?
MSI	5870 ATI Radeon HD R5870-PM2D1G	Yes	Device ID=0x9898 OSX 10.6.7 Multibeast 3.4 iBoot ?.?
MSI	5870 ATI Radeon HD R5870 Lightning II	Yes	Device ID=0x6898 OSX 10.6.7 Multibeast 3.4 for SB & ATI Framebuffer=Uakari
MSI	6450 AMD Radeon HD R6450-MD1GD3 LP	Yes	Device ID=0x6779 OSX 10.6.7 Mutlibeast 3.6 iBoot ?.? Latest ATI6000Controler.kext. HDMI 1920x1080 DVI 1440x900. Chimera v1.3 + Graphics Enabler=Yes
MSI	6850 AMD Radeon HD R6850 Cyclone 1GD5 Power Edition/OC	Yes	Works OOB. Second DVI doesn't work with GraphicsEnabler=Yes. To use the second DVI set GraphicsEnabler=No, but it makes some apps crash (like dvd player and some games). Haven't tested displayport or hdmi yet. Running 10.7.2, Multibeast 4.0.2, Chimera 1.5.4. DSDT method works well with aticonfig=Gibba ,but not well with Duckweed or Bulrushes .
MSI	6870 AMD Radeon HD R6870 Twin Frozr II	Yes	Device ID=0x6738 OSX 10.6.7 Mutlibeast 3.4 iBoot ?.? using Framebuffer=Duckweed
PowerColor	5770 ATI Radeon HD 1GB GDDR5	Yes	iBoot ATI with GraphicsEnabler=Yes HDMI Works. DVI Works. No sound over HDMI. Runs in PCIe x8. OS X 10.6.7 64-bit and 32-bit work perfectly.
Powercolor	5770 ATI Radeon HD AX5770 1GBD5-PPGV2	Yes	Experimental ATI Chameleon/Chimera + Graphics Enabler = Yes. Works in 32/64 bit mode. Dual monitors = Yes, Multibeast 3.4-4.1 confirmed. OSX 10.6.7-OSX 10.7.2
PowerColor	6850 AMD Radeon HD - Fanless	Yes	Device ID=0x6739 OSX 10.6.8 and OSX 10.7.x. Solve mouse / cursor freezes and get dual DVI output with AtiConfig=Pithecia. GraphicsEnabler=No.
Powercolor	6870 AMD Radeon HD AX6870 1GBD5-M2DH	Yes	Device ID=0x6738 OSX 10.6.7 Multibeast 3.4 iBoot ?.?
Sapphire	4850 ATI Radeon HD 1GB DVI/VGA/HDMI	Yes	MultiBeast 2.5.1 Chemalon with ATI + Graphics Enabler=Yes + 10.6.5 Patched ATI 48XX kext, VGA 1650x1080, DVI 1920x1200 (QE/CI worked only after several reboots, also worked under 10.6.2 with appropriate kexts)
Sapphire	4870 ATI Radeon HD 1GB Dual DVI	Yes	GraphicsEnabler=Yes with DSDT. Both DVI work (dual not tested).
Sapphire	5450 ATI Radeon HD 1GB DDR3 HDMI	Yes	Only DVI tested, method removed from forum/in dispute
Sapphire	5570 ATI Radeon HD	Yes	Device ID=0x68d9 OSX 10.6.7 Used Multibeast 3.7.3 and newest iBoot (as of 7/9/11) Upgraded from 10.6.0 to 16.6.7 using Combo update with on board graphics from i5 650 only. After upgrade, removed ACPI_SMC_PlatformPlugIn.kext (located in the IOPlatformFamilyPlugIn.kext folder), then Terminal command: sudo touch /System/Library/Extensions (password), then ran system utilities from Multibeast and rebooted from I-boot. Next installed Chimera v1.4.1, and run system utilities again, and reboot from hard disk. Was not necessary to modify com.apple.plist or enter device ID. Full QE/CI in 64 bit.
Sapphire	5670 ATI Radeon HD 100287L	Yes	Device ID= 0x68d8 OSX 10.6.8 Used Multibeast 3.10.0. QE/CI are enabled (ioreg reports 'Baboon' framebuffer) and apps like DVD Player work. No manual kext edits necessary.
Sapphire	5750 ATI Radeon HD 100284VXL	Yes	Device ID=0x68BE OSX 10.6.7 Multibeast 3.4 iBoot ?.? Chameleaon ATI experimental Successful if edit ATI5000Controler.kext to include the 0x68BE1002 ID / iBoot ATI 5XXX-3 + GraphicsEnabler=No. Dual DVI works. To add - I had to edit ATI5000controller.kext and ATIRadeonX3000.kext and add the 5750's DeviceID to the Kext to get it working
Sapphire	5770 ATI Radeon HD 100283VX-2L	Yes	Device ID=0x68B8 OSX 10.6.7 Multibeast 3.4 using iBoot ATI + GraphicsEnabler=No. Dual DVI works. HDMI works fine. Display Port not tested. Must install multibeast with no graphics options first, reboot and then install graphics kexts.
Sapphire	5850 ATI Radeon HD 100282XTREME	Yes	Device ID=0x6899 OSX 10.6.7 Multibeast 3.4 iBoot ?.? using Notshy's method Framebuffer=Uakari / iBoot 3.0 + MultiBeast 3.5.0 + Chameleon 2.0 RC5 r748 - ATI Experimental + GraphicsEnabler=Yes. 64-bit works. DVI works. HDMI not tested. DisplayPort not tested.
Sapphire	5850 ATI Radeon HD Toxic 1GB GDDR5	Yes	Custom Boot with kabyl boot file + Multibeast + GraphicsEnabler=Yes. Dual DVI works. HDMI works fine. Display Port not tested. Must install multibeast with no graphics options first, replace /boot with this! 64 bits working!.
Sapphire	5850 ATI Radeon HD Xtreme 1GB GDDR5 DVI/HDMI/DisplayPort	No	Device ID=0x6889, DisplayPort untested, OS X 10.7.2, Chimera 1.6, GraphicsEnabler=No. Works: HDMI, DVI-Analg, Dual HDMI+DVI-Analog, Sleep/Wake, Starcraft 2 Demo. DOES NOT WORK: QE/CI, DVD Player, Ableton Live Demo
Sapphire	5850 ATI Radeon HD Xtreme 1GB GDDR5 DVI/HDMI/DisplayPort	Yes	Device ID=0x6889, DisplayPort untested, OS X 10.7.2, Chimera 1.6, GraphicsEnabler=Yes. Works: HDMI, DVI-Analg, Dual HDMI+DVI-Analog, Sleep/Wake, Starcraft 2 Demo, DVD Player, Ableton Live Demo DOES NOT WORK: 3D Fullscreen slight tearing of image (like VSync was off), Always shows VGA Display as primary display (can be changed via OS X display preferences)
Sapphire	HD 5870 1GB GDDR5	Yes	Device ID=0x6898 Everything works OOB with DVI/HDMI/DP on Lion, Chimera 1.9.1, MultiBeast 4.3.1, UniBeast 1.2.0. GraphicsEnabler=Yes.
Sapphire	5870 ATI Radeon HD 100281VX-2SR	Yes	Device ID=0x6898 OSX 10.6.7 Multibeast 3.4 iBoot ?.? / iBoot ATI 5xxx Beta 3 + GraphicsEnabler=No. Dual DVI works. HDMI not tested. Display Port tested working w/ Apple 27". Must install multibeast with no graphics options first, reboot and then install Apple Graphics update. Also see this guide.
Sapphire	6570 AMD Radeon HD 1Gb ddr3	Yes	Work OOB without any changes. HDMI not tested
Sapphire	6850 AMD Radeon HD 100315TXSR	Yes	Device ID=?X??? OSX 10.6.7 Multibeast ?.? iBoot ?.?
Sapphire	6850 AMD Radeon HD	Yes	Everything works OOB, GraphicEnabler=No, 64 Bit. Got both DVIs working in dual screen, upper one with DVI/VGA Adapter. All Outputs are available, everything is detected and works very smooth :) 10.6.8, Chameleon 2.0 RC-5
Sapphire	6870 AMD Radeon HD 100314SR	Yes	Device ID-?X??? OSX 10.6.7 Multibeast 3.4 iBoot 2.7 using Andy's ATI patch Framebuffer=Duckweed/ Notshy's method Framebuffer=Duckweed
Sapphire	6870 AMD Radeon HD 100314-2SR	Yes	Device ID-?X??? OSX 10.6.7 Multibeast ?.? iBoot ?.?
Sapphire	6870 AMD Radeon HD 100314TXSR	Yes	Device ID=0x6738 OSX 10.6.7 Multibeast 3.4 iBoot ?.?
Sapphire	6870 AMD Radeon HD 111790040R	Yes	Device ID=0x6738 OSX 10.6.7 Multibeast 3.4, Framebuffer=Duckweed. The second DVI port doesn't work with any of the 10.6.7 framebuffers, but mini displayport->DVI does.
VTX 3D	5770 ATI Radeon HD PCI-E 1GB DDR5	Yes	iBoot 3.0.4, Chimera 1.4.1, MultiBeast 3.7.2, UserDSDT Install, GraphicsEnabler=No, 64 bit=YES
XFX	4870 ATI Radeon HD 1GB Dual DVI	Yes	GraphicsEnabler=Y with DSDT. Dual output not yet confirmed.
XFX	4890 ATI Radeon HD 1GB Dual DVI	Yes	GraphicsEnabler=Y without DSDT. Dual confirmed. ATI 48xxInjector for Snow Leopard. QE/CI 48xx Patch for Lion
XFX	5750 ATI Radeon HD HD-575X-ZNFC	Yes	Device ID=0x68BE OSX 10.6.7 Multibeast 3.4 iBoot ?.?
XFX	5770 ATI Radeon HD HD-577A-ZNFC	Yes	Device ID=0x68B8 OSX 10.6.7 Multibeast X.X / Use Kabyl ATI Chameleon boot in MultiBeast 2.5.1 or above. arch=x86_64 + GraphicsEnabler=Yes. 64-bit works. DVI works. Dual DVI Works. Triple DVI/DVI/VGA (Display Port) works. Display Port works. Readthis Some users report that BIOS must be changed to an earlier version for later versions of Snow Leopard and Lion to boot: see this thread and this thread.
XFX	5770 ATI Radeon HD HD-577X-ZMF3	Yes	Device ID=0x68B8 OSX 10.6.7 Multibeast X.X arch=x86_64 + GraphicsEnabler=Yes. 64-bit works. DVI works. Mini-Display Port works. Works natively (mdp) w/ 27" Apple Cinema Display in 10.6.7 64-bit]
XFX	5850 ATI Radeon HD HD585X-ZABC	Yes	Device ID=0x6899 OSX 10.6.7 Multibeast 3.4 iBoot ?.?
XFX	5870 ATI Radeon HD HD-587X-ZNFC	Yes	Chameleon 2.0 RC5 - ATI Experimental (Kabyl boot file) + GraphicsEnabler=Yes. 64-bits. Dual DVI works. Other ports not tested.
XFX	6850 ATI Radeon HD	Yes	Device ID=0x6739 OS X 10.7.1 GraphicsEnabler=Yes. Full acceleration and full res works on main monitor. System Preferences reports 4 displays but dual DVI doesn't work using the two built in DVI's. Dual display does work with a DisplayPort to DVI connector.
XFX	6870 AMD Radeon HD HD-687A-ZNBC	Yes	Device ID=0x6738 OSX 10.6.8 Multibeast 3.8.0 iBoot 3.1.1 UserDSDT Install, 64-bit, card has two DVI, two mini DisplayPort and one HDMI, dual monitor support works using main DVI port and mini DisplayPort with DVI adaptor, dual DVI does NOT work. Three screens active using one DVI port, the HDMI port (with HDMI to DVI cable) and one miniDisplay port (using miniDisplay to DVI active adaptor StarTech.com MDP2DIVS) on 10.7.2.
XFX	6870 AMD Radeon HD HD-687A-ZNFC	Yes	Device ID=?X??? OSX 10.6.7 Multibeast ?.? iBoot ?.?
XFX	6870 AMD Radeon HD HD-687A-ZDFC	Yes	Device ID=0x6738 OSX 10.6.7 Multibeast 3.4 iBoot ?.? using Andy's ATI patch
XFX	6870 AMD Radeon HD HD-687A-ZDFC	Yes	Device ID=0x6738,clean install from xMove Lion Installer partition with rBoot,full resolution already.After 10.7.0 install completed,installed latest Chimera and upgraded to 10.7.1,GPU correctly recognized and working at full rez booting from HDD with GE=Yes.So working OOB! alex_tirdea P.S.This is the Black Edition Dual Fan v2 ^^
XFX	HD-687X-CNFC Radeon HD 6870 2GB	Yes	Works out of box with lion

Laptop/Mobile

Manufacturer	Model	QE/CI	Method / Notes
nVIDIA	GeForce GT 230M 1GB	Yes	GraphicsEnabler=Y with ATY_init kext / works on HP DV7 laptop
nVIDIA	GeForce 9300M GS 256mo	Yes	GraphicsEnabler=Y, laptop (Acer TM 7730G)
nVIDIA	NVS 3100M 512MB DDR3	Yes	Out of Box with iBoot-Supported

NVIDIA

Note: The 4xx series of NVIDIA graphics cards experiences random kernel panics and freezing in Mac OS X Snow Leopard. An update to Lion is recommended!

Manufacturer	Model	QE/CI	Method / Notes
ASUS	EN6600/TD/256M/silencer geforce 6600 256MB	Yes	Working Out Of the Box with iboot (tested on 10.6), did not change anything and was instantly recognized(vga tested only).
ASUS	EN7300GT SILENT/HTD/256M	Yes	Working OOB with iboot, vga(d-sub) tested, fully recognized in 10.6.2(others not tested)
ASUS	ENGTX 470 1280MB 320-bit GDDR5	Yes	DVI iBoot 2.6/OS X 10.6.6 updated using NVidia Quadro 4000 drivers
ASUS	ENGTX 480 1536MB GDDR5	Yes	Both DVI tested OK / HDMI not tested / OS X 10.6.5+ with tonymacx86 nVidia Update / OS X 10.7 as in / GraphicsEnabler=Yes
ASUS	GeForce 210 1GB GDDR2	Yes	EFI String in /Extra/com.apple.boot.plist, Remove NVEnabler kext, GraphicsEnabler=Yes. 10.6.4 with latest NVidia graphics update. Do NOT add device ID to NVDANV50Hal.kext and NVDAResman.kext, the device ID is nonstandard to GF210 (0x0a2310de instead of 0x0a6510de) and will only cause the kernel to panic.
ASUS	Geforce 210 1GB GDDR3 ( EN210 SILENT/DI/1GD3/V2(LP) )	Yes	No EFI or Kext or Injector Needed, Fresh install Snow Leopard 10.6.8 updated to 10.7,10.7.1 (Lion) using graphics enabler=Yes. Voila all detected and working OOB.
ASUS	GeForce 7500 LE	Yes	NVenabler kext - iBoot v2.6, 10.6.3
ASUS	GeForce 7600GT 256MB	Yes	NVEnabler.kext (tested over DVI up to 1920x1080x32) - 10.6.5
ASUS	GeForce 8400GS 512MB Silent	Yes	Working out of the box - 10.6 - doing more tests later
ASUS	GeForce 9600GT 512Mb	Yes	NVenabler kext
ASUS	GeForce 9800GT 1GB	Yes	NVenabler kext
ASUS	GeForce EN8600GT Silent 256MB	Yes	Works with EFI string made with GfxUtil. No problems with dual monitors. 10.6.7
ASUS	GeForce ENGT240 1GB DDR3	Yes	Dual Display not tested - 64 bit graphics enabler. 10.6.7
ASUS	GeForce ENGT240 512MB DDR5	Yes	Dual Display good - NVEnabler, or 64 bit graphics enabler. Work from 10.6.3 upwards, black screen on 10.6.1 and 2
ASUS	GeForce GTS 250 512M GDDR3 (ENGTS250)	Yes	Working OOB GraphicsEnabler=Yes - 10.6.5 (iBoot 2.5.2, 10.6.3 retail, then 10.6.5 ComboUpdate + MultiBeast). MultiDisplay, haven't tested HDMI.
ASUS	GTS 450	Yes	Working Out Of the Box with iboot, GraphicsEnabler=Yes , DVI tested, HDMI not tested, lion 10.7.2
BFG	GeForce 8800GTX 768MB	Yes	Lion 10.7.1 - GraphicsEnabler=Yes, removed GeForce7xxx.kext and NVDAResmanG7xxx.kext to prevent driver for older card being loaded.
BFG	GeForce GTX 260 896MB OC (Dual DVI version)	Yes	Working in 64bit with iboot + nvenabler from multibeast
EVGA	GeForce GTX 280 1024MB	Yes
EVGA	Geforce 7800GT 256MB	Yes	GraphicsEnabler=Yes IBoot+ Multibeast 10.6.7 32 bit only dual DVI display.
EVGA	GeForce 8400GS 512MB (10de:06e4)	Yes	Working in 10.6.8 GraphicEnabler=Yes - Dual Display - Graphics Acelerator - All Resolution. Working 64 bits.
EVGA	GeForce 8400GS 512MB DDR3 Silent (0x10de:0x10c3)	Yes	Install official NVIDIA driver release Retail_256.02.25f1v1.dmg to enable dual monitor support (VGA/VGA adaptor/DVI) with full acceleration. HDMI also working. NOTE kernel panic on 10.6.3 install with MSI P55GD65 mainboard. Installed with older ASUS 128MB card then switched once install complete.
EVGA	GeForce 8800GT 1GB	Yes	GraphicsEnabler=Yes. Full DVI (Channel 1) + DVI or S-VIDEO (Channel 2).
EVGA	GeForce 9500GT 1GB	Yes	GraphicsEnabler=Yes 10.6.6
EVGA	GeForce 9600GT 512MB	Yes	OOB with GraphicsEnabler=Yes | 10.6.1 - 10.6.4 | Dual DVI | Everything working | completely recognized
EVGA	GeForce 9800GT 1GB	Yes	GraphicsEnabler=Yes, and may possibly need to disable AppleUpstreamUserClient.kext if the mouse chokes.
EVGA	GeForce 9800GTX 512MB	Yes	10.6.1 and earlier works OOB. Works in 10.6.2 with 10.6.1 drivers (NVDANV50Hal.kext & NVDAResman.kext). Skipped to 10.6.4 and boots, but gives black screen. Older drivers don't help. Seems to be HDCP issue with HDMI displays (VGA works fine).
EVGA	GeForce 9800GTX+ 512MB	Yes	GraphicsEnabler=Yes
EVGA	GeForce GT 240 1GB	Yes	Dual display (DVI & VGA) Remove NVEnabler & GraphicsEnabler=Yes 10.6.3
EVGA	Geforce GT 430 1 Gb DDR3 01G-P3-1431-KR	Yes	On first start up use graphicsenabler=no , update to 10.6.8, use offical NVIDIA Graphics shown at tonmacx86. Dual screen supported, full support for full Hd monitor, Hdmi no tested, full memory supported
EVGA	GeForce GT 520 1024MB DDR3 01G-P3-1526-KR	Yes	Works well with 10.7.3- Tested up to 1280x1024 DVI dual monitors 32 bit. The card is recognized automatically. QE/CI works - chess works, translucent menu bar, and ripples around new widgets appear in the dashboard when not shown as a space in Mission Control. OpenGL works. OpenCL is not recognized in Lux Mark (I think this was broken in 10.7.3). Sleep/wake work well, although USB isn't recognized if you wake using a USB device. I used the Unibeast method to do a clean install. This is a great basic card for Lion if you don't need a lot of power for games.
EVGA	GeForce GT220 1GB DDR3	Yes	10.6.4
EVGA	GeForce GTS 250 1GB	Yes	GraphicsEnabler=Yes 10.6.6
EVGA	GeForce GTX 260+ 896MB	Yes	GraphicsEnable=Yes - (10.6.1 - 10.6.5) - Dual Display DVI works OOB
EVGA	GeForce GTX 275 896MB	Yes	Dual display (DVI & VGA) 10.6.3
EVGA	GeForce GTX 285 1GB	Yes	Dual display (DVI & VGA) 10.6.3 with GraphicsEnabler=Yes, used updated 10.6.4 nvidia drivers
EVGA	GT 440 1024MB	Yes	Works on 10.6.7. Only one display tested. Shows 512MB. Used tonymacx86 NVIDIA Update and Chameleon 2.0 RC5 with GraphicsEnabler=Yes. See this forum topic
EVGA	GTX 460 1024MB	Yes	DeviceID=x0e22.Dual-Display DVI/Multibeast 4.2(Lion 10.7.2)/SLI bridged (ignored in OS X) with EFI injection. Fermi freezes fixed with macpro5,1 smbios and APGM edits [1]. Installed first with nvidia.com drivers on fresh 10.7.0, then cuda drivers, graphicsenabler=no, efi injection, combo update to 10.7.2. - Working on clean install of 10.7.3 unibeast, Z68 - BIOS set to "init first: PCIE x16" to get it booting from HDD, then multibeast 4.3.1 -> 10.7.2/10.7.3 CL Enabler, NVIDIA drivers Retail_270.00.00f01.dmg, cuda driver cudadriver-4.2.5-macos, recognized for hardware mercury engine in Adobe Premiere after using this hackhttp://www.studio1productions.com/Articles/PremiereCS5-faq.htm - two monitors, all resolutions, core / quartz working, isadora working! Sleep working too!
EVGA	GTX 470 1280mb	Yes	DVI/HDMI iBoot-GE/MultiBeast 3.0/tonymacx86 NVIDIA Update
EVGA	GTX 550 ti 1GB	Yes	Working OOB with GraphicsEnabler=Yes. Tested DVI. 1080p Lion 10.7.3
Gainward	GeForce GTX 260 896MB GS	Yes	Dual DVI working OOB using iBoot and NVenabler with MultiBeast.
Gainward	Gainward GTX580 Phantom3 1536MB	Yes	Both DVI tested OK / HDMI not tested / OS X 10.7.0 Corei7 Hackintosh 10.7 Lion Performace Test
Gainward	560Ti Phantom 2048MB	Yes	Works on OS X 10.7.0 Install method, Example, Required files
Gainward	GeForce 8800GT 512MB	Yes	GraphicsEnabler=Yes. QE/CI ok. Fullscreen 3D only with VSync and at OS X Desktop resolution.
Gainward	GeForce 9800GT 1GB Green Edition	Yes	GraphicsEnabler=Yes, DVI+VGA Dual working 10.6.6
Gainward	GeForce GTS 250 Green Edition 1GB	Yes	GraphicsEnabler=Yes
Gainward	GeForce GTX 460	Yes	dsdt.aml modified with MultiBeast, tonymacx86 Drivers and video loop (VLC) on background.
Gainward	GTX 285	Yes	Card worked OOB iBootv3.1, SL 10.6.6
Galaxy	GeForce 8400GS 512MB	Yes	10.7.2: add 0x10c310de&0xffe0ffff to /System/Library/Extensions/NVDANV50Hal.kext/Contents/Info.plist as a string to the key IOPCIPrimaryMatch. May work for other GeForce 8400GS cards too
Galaxy	GeForce 9500GT 1GB	Yes	GraphicsEnabler=Yes with DSDT (tested with dual DVI @ 1080p) | 10.6.4
Galaxy	GeForce GT 430 1024MB 128-bit DDR3	Yes	VGA tested with iBoot and combo update to 10.6.8 Updated driver with current Quadro driver from nVidia. Full acceleration Full memory recognized. Tested Working In 64 bit Mode. Works OOB on Lion 10.7.3; Individual ports work, VGA+HDMI tested, VGA+DVI does NOT work.
Galaxy	GeForce GT 440 1GB DDR3	Yes	Only Tested DVI and HDMI. Almost Fully working, only no sound from HDMI. GraphicsEnabler=Yes, running chameleon v2.1VS r1817. Recognizes full 1024MB. Lion 10.7.3
Galaxy	GeForce GTX 460 768 MB	Yes	Works with dual-monitors (one DVI and one VGA). Installed official NVIDIA Graphics drivers (tonymacx86 NVIDIA Update works too), NVEnabler (available in Multibeast 3.7.2), and 32-bit Boot Screen. The monitor connected to the DVI port occasionally displays static for 5-10 seconds after turning on.
Gigabyte	GeForce GTS 250 OC 1GB ver.2.0	Yes	Working with NVenabler 64.kext, Graphics Enabler=Yes or EFI String, dual display works (DVI2DVI, HDMI2DVI or D-Sub2D-Sub) works, 10.6.0 - 10.6.4. Edit: HDMI works with some limitations, can't be hot plugged.
Gigabyte	GeForce 7300 GT 256MB	Yes	Working OOB with 10.6.3 and Snow Leopard Graphics Update as well as 10.6.5 (tested with DVI + D-Sub)
Gigabyte	GeForce 8600GT 256MB	Yes	NVEnabler 64.kext (tested over DVI up to 1680x1050x32) - 10.6.4
Gigabyte	GeForce 8600GT 256MB	Yes	NVEnabler 64.kext (tested over DVI up to 1920x1280x32) - 10.6.2, multiple monitors working with full Q
Gigabyte	Geforce 8600GTS	Yes	GraphicsEnabler=Yes, Dual Monitors Working | 10.6.3
Gigabyte	GeForce 9800GT 1GB Silent Cell GV-N98TSL-1GI	Yes	Dual display (DVI & VGA) works OOB in 10.6.2 and 10.6.3 with GraphicsEnabler=Yes; Seems to be HDCP issue with HDMI displays (VGA works fine) in 10.6.4; DVI works in 10.6.6
Gigabyte	GeForce GT 240 1GB GDDR5 Silent	Yes	Works in 10.6.7. Installed Chameleon 2.0 RC5 from Multibeast, tonymacx86 NVIDIA Update and applied "PCI Root ID Fix for Chameleon" in Multibeast. See this forum topic;.
Gigabyte	GeForce GTS 250 1GB	Yes	Tested on OSX 10.6.3 (iBoot+Multibeast). Graphics work out of the box running with a Cinema HD 23" with DVI.
Gigabyte	GeForce GTX 570 1280MB	Yes	DVI tested, with full QE/CI, OpenCL and CUDA on OS X 10.7.2 / INSTRUCTIONS: Duplicate the "NVDAGF100Hal.kext" in S/L/E, then show package contents -> contents -> info.plist and add this line in the "IOPCI Primary Match section": "0x108110de&0xffe0ffff" (remove quotes). Reinstall the edited kext with Kext Utility (rebuild kexts... etc) and reboot to get QE/CI. Install the "NVIDIA Fermi OpenCL enabler" option in MultiBeast - Lion Edition to get OpenCL, and download the official CUDA drivers from the NVIDIA website: Mac Driver Archive Also, delete the Works like a charm... three days and no kernel panics. Also, remove AppleGraphicsPowerManagement.kext to achieve full graphics power. GraphicsEnabler=Yes, but leave Graphics Mode disabled to avoid 3D apps to crash.
Gigabyte	GT240 1GB GDDR5	yes	nvenabler,Tonymac nvidia update ,10.6.6.
Maxsun	GeForce GTX460 768MB	Yes	Working OOB with 10.7.2 (not tested D-Sub yet)
MSI	GeForce GTS 250 TwinFrozr OC 1GB	Yes	Both DVI ports work out of the box with GraphicsEnabler; disable AppleUpstreamUserClient.kext to fix skipping mouse issues. DSDT edit required for correct GPU name in System Profiler, although some applications (Photoshop CS5) recognize the model without edits. Occasional "static" lasting up to 20 seconds on one screen after display wake.
MSI	Cyclone GTX 460 1024MB	Yes	Dual-Display DVI/Multibeast 3.3/tonymacx86 NVIDIA Update
MSI	GeForce 210 1GB DDR3	Yes	GraphicsEnabler=No, With EFI String. 10.6.8 and 10.7 working.
MSI	Geforce 7950GT 256MB	Yes	Use 32 bits Apple boot screen option on Lion 10.7.2 and up.
MSI	GeForce 8400GS 256MB	Yes	Must use 'GraphicsEnabler=Yes' and add vendor code to proper kext. Select 'Show package contents' of NVAND50Hal.kext and edit Info.plist as root - under IOPCIPrimaryMatch key, add string 0x10c310de&0xfff0ffff as first line. Works with both DVI and VGA up to 1900x1200x32 - 10.7.2
MSI	GeForce 8800GTS 320MB	Yes	GraphicsEnabler=Yes. Dual DVI is OK
MSI	GeForce 9800GT 1GB	Yes	NVenabler kext. 1900x1200. Still need to test dual monitors. | 10.6.4
MSI	GeForce N210 512MB DDR2 (N210-D512D2)	Yes	10.7 and 10.7.2 Full support without mod
nVidia (OEM HP)	GeForce GTX 260 1792MB	Yes	boot with GraphicsEnabler=No add device ID in NVDAResman.kext & NVDANV50Hal.kext then change to GraphicsEnabler=Yes
nVidia	GeForce 7600GS 256MB	Yes	NVEnabler.kext (tested over DVI up to 1920x1080x32 + 1400 x 1050x32 dual display) - 32 bit only 10.6.8
nVidia	GeForce 9800GT 1GB	Yes	NVenabler kext
nVidia	GeForce Go 7300	Yes	Working out of the box with (IBoot+ Multibeast). Tested on 10.6.2 and currently 10.6.4 | 10.6.4
nVidia	Quadro 4000	Yes	The latest Quadro NVIDIA Driver
Palit	GeForce GTS 250 1GB DDR3	Yes	GraphicsEnabler=Yes (tested on 10.7.3)
Pegatron/Dell/ASUS-Offbrand	GeForce GT220 1024 MB	Yes	Using Chameleon/Chimera GraphicsEnabler=Yes VBIOS=Yes NvidiaBios=Yes with bios.rom dumped from windows using NVFLASH. Rename bios to XXXX_XXXX.rom using the first XXXX as VendorID and the second XXXX as DeviceID.
PNY	Geforce 210 256MB	Yes	EFI strings in com.apple.boot.plist, add device ID in NVDAResman.kext & NVDANV50Hal.kext | 10.6.4
PNY	GeForce 450 1GB DDR5	Yes	Ports fully working DVI/DVI/HDMI - Requires Chameleon 2.0 RC5 Prerelease r643 or higher, 10.6.5, and tonymacx86 NVIDIA Update
PNY	GeForce 9800GT EE 512MB	Yes	GraphicsEnabler=Yes with DSDT; Seems to be HDCP issue with HDMI displays in 10.6.4 and above; VGA works fine
PNY	Quadro FX 1500 256MB	Yes	GraphicsEnabler=Yes 10.6.4
PNY	Quadro NVS 290 256MB	Yes	Dual display DVI/DVI GraphicsEnabler=Yes 10.6.8 & 10.7.1
SPARKLE	GeForce 8400GS 512MB (10de:06e4)	Yes	Working OOB with GraphicsEnabler=Yes - 10.6.4
SPARKLE	GeForce 9400GT 1GB	Yes	NVenabler + 10.6.1 graphics kexts in 10.6.2, 10.6.3 still having issues with multiple monitors.
SPARKLE	GeForce 9800GTX+ 1Gb	Yes	NVenabler kext
SPARKLE	Geforce GT 430 1280mb	Yes	DVI/HDMI iBoot-GE/MultiBeast 3.0/tonymacx86 NVIDIA Update + vbios + natit.kext 10.6.7
SPARKLE	GeForce GT220 1GB DDR3	Yes	GraphicsEnabler=No, install NVEnabler 64 kext. Tested VGA, DVI and HDMI. 10.6.8 and 10.7 working.
SPARKLE	GeForce GTX 260+ 896MB	Yes	GraphicsEnabler=Yes | 10.6.1 - 10.6.8 | Dual Display (DVI)
Twintech	GeForce GTX 285 1024MB	Yes	OOB (iBoot+Multibeast) OSX 10.6.3 / 10.6.4 + updated nVidia drivers 19.5.8f03
Twintech	GeForce 8400GS 256MB (10C3)	Yes	GraphicsEnabler=Yes & Edit NVDANV50Hal.kext and in IOPCIPrimaryMatch key, add device id 0x10c310de - 10.6.5
XFX	GeForce 8500GT Fanless 512MB	Yes	Working OOB with GraphicsEnabler=Yes - 10.6.8
XFX	GeForce GT 240 1GB DDR3	Yes	Working OOB with GraphicsEnabler=Yes - 10.6.8
XFX	GeForce GTS 250 1GB	Yes	10.6.4 with graphics enabled via DSDT
XFX	GeForce GTS 250 1GB	Yes	OOB with iBoot supported installing 10.6.3 Retail Disc + GraphicsEnabler=Yes
XFX	GeForce GTS 250 512MB DDR3	Yes	GraphicsEnabler=Yes and NVenabler 64.kext
XFX	Geforece 9400GT 512MB	Yes	Working OOB with unibeast from retail.  All resolutions available, DVI and VGA working.  Dual monitors working.  10.7.0 and 10.7.3 after combo update
Zotac	GeForce 8400GS 512MB	Yes	Working OOB with GraphicsEnabler=Yes - 10.6.8 and 10.7.2
Zotac	GeForce 9500GT 1GB	Yes	GraphicsEnabler=Yes 10.7.3 installed via UniBeast, works OOB (tested both DVI and HDMI @ 1920x1080 aka 1080p)
Zotac	GeForce 9600 GSO 512MB and 1GB	Yes	GraphicsEnabler=Yes | 10.6.4, 10.7.2 OK
Zotac	GeForce 9800GT 1GB	Yes	GraphicsEnabler=Yes, DVI or VGA, DVI+VGA Not Tested
Zotac	GeForce GT 520 1024MB 128-bit DDR3	Yes	Only needed GraphicsEnabler=Yes. Vendor already supported by NVAND100Hal.kext in IOPCIPrimaryMatch key. Tested up to 1900x1200x32 DVI & VGA. HDMI untested. 10.7.2
Zotac	GeForce GT440 1GB DDR3	Yes	Both DVI ports work, fully recognized after Multibeast 4.2 update but only recognized 512MB before update
Zotac	GeForce GTS 450 Amp! 1024MB DDR5	Yes	Installed official NVIDIA Graphics drivers & tonymacx86 NVIDIA Update & CUDA. Requires Chameleon 2.0 RC5 and NVEnabler and 10.6.8. Tested HDMI 1600 X 900.
Zotac	Zotac ZT-95TEK2M-FSL GeForce 9500GT 1GB	Yes	Working OOB with Chimera 1.7 and Lion 10.7.2/10.7.3 at 1080p on HDMI (DVI/VGA untested).