Integrated
| Manufacturer | Model | QE/CI | Method / Notes |
|---|---|---|---|
| Intel | (X)4500(HD) (Eaglelake) | No | Works OOB without kext (no QE/CI). Edit sample: "com.apple.Boot.plist" <key>Graphics Mode</key><string>1280x1024x32</string> <key>GraphicsEnabler</key><string>Yes</string> |
| Intel | 4500MHD (Cantiga) | No | Works OOB without kext (no QE/CI). Edit sample: "com.apple.Boot.plist" <key>Graphics Mode</key><string>1280x1024x32</string> <key>GraphicsEnabler</key><string>Yes</string> |
| Intel | HD (Ironlake) | No | 10.6.5-10.6.8 and 10.7.0-10.7.1 (even on Installation boot) will hang on boot, rename/remove AppleIntelHDGraphics.kext, and AppleIntelHDGraphicsFB.kext from /S/L/E. |
| Intel | HD (Sandy Bridge) | ||
| Intel | HD 2000 | No | Can enable full resolution in Mac OS X Lion, but no graphics acceleration (QE/CI) |
| Intel | HD 3000 | Yes | Works with Chimera 1.5 in Lion |
| Intel | HD 2500 | ||
| Intel | HD 4000 | ||
| Intel+NVIDIA | Integrated + GT210M | No | Cannot force NVIDIA graphics, stuck on Intel (1024x768) which is currently unsupported |
ATI
| Manufacturer | Model | QE/CI | Method / Notes |
|---|---|---|---|
| Asus | 4670 ATI Radeon HD EAH4670/DI/1GD3/A | Yes | Device ID=0x9490 OSX 10.6.7 Multibeast 3.4 iBoot ?.? |
| Asus | 4670 ATI Radeon HD EAH4670/DI/1GD3/V2 | Yes | Device ID=?x??? OSX 10.?.? Multibeast ?.? iBoot ?.? |
| Asus | 5770 ATI Radeon HD EAH5770 FORMULA | Yes | Device ID=0x68BE OSX 10.6.7 Multibeast 3.4 iBoot ?.?. You have to add card DeviceID to version.plist inside ATI5000Controller.kext as 0x68BE1002 |
| Asus | 5770 ATI Radeon HD EAH5770 CuCore/2DI/1GD5 | Yes | Device ID=?x??? OSX 10.6.7 Multibeast 3.4 iBoot ?.? |
| Asus | 6850 AMD Radeon HD EAH6850 DC/2DIS/1GD5/V2 | Yes | Device ID-0x6739 OSX 10.6.7 Multibeast 3.4 iBoot ?.? |
| Asus | 6870 AMD Radeon HD EAH6870/2DI2S/1GD5 | Yes | Device ID-0x6738 OSX 10.6.7 Multibeast 3.4 iBoot ?.? |
| Biostar | 4670 ATI Radeon HD DVI/VGA | Yes | Device ID-0x9490 OSX 10.7.x Multibeast 4.1, use GraphicsEnablers=Yes, Snow leopard uses kext editing |
| Club 3D | 4850 ATI Radeon HD CGAX-48524I DVI/VGA/HDMI | No | Not tested in DVI. Safe mode only, tried all drivers available in 10.6.0/2/3. Strange colors on display with stripes all over. Graphics Enabler=Yes results in kernel panic, -pci1 PciRoot=1 (or 0) don't work either. |
| Club 3D | 5570 ATI Radeon HD CGAX-557241 | Yes | Installed Lion 10.7.3 with Unibeast and selected Easy Beast in Multibeast settings. Working great in dual screen on HDMI and VGA ports. But the HDMI is considered as VGA and won't go into sleep mode... |
| Diablotek | 5770 ATI Radeon HD VX5770 1GBD5-H | Yes | Device ID-0x68B8 OSX 10.6.7 Multibeast 3.4 iBoot ?.? |
| Diamond | 5870 ATI Radeon HD 5870PE51G | Yes | Device ID=0x9898 OSX 10.6.6 Multibeast 3.4 iBoot ?.? |
| Diamond | 6850 AMD Radeon HD VCX-DMD-6850PE51G | Yes | Device ID-0x6739 OSX 10.6.7 Multibeast 3.4 iBoot ?.? |
| Gigabyte | 4850 ATI Radeon HD 1GB Dual DVI | Yes | Check this page |
| Gigabyte | 5670 ATI Radeon HD 1GB GDDR5 | Yes | iBoot 2.5.(4?) + MultiBeast on 10.6.6. DVI+VGA work at max res, HDMI not tested, 64bit OK. Boot with: kabyl boot file + 5670 ROM + edit "com.apple.Boot.plist" with (GraphicsEnabler=Yes, arch=x86_64, useAtiROM=Yes, AtiConfig=Baboon). More details and downloads check this, it constantly updates and my build was already not the latest one (25Jan2011). |
| Gigabyte | 5750 ATI Radeon HD GV-R575SL-1GI | Yes | Device ID=0x68BE OSX 10.6.7 Multibeast 3.4 iBoot ? |
| Gigabyte | 5770 ATI Radeon HD GV-R577UD-1GD | Yes | Device ID-0x68B8 OSX 10.6.7 Multibeast 3.2 iBoot 2.7/ ATI drivers from 3.4 using Notshy's method FrameBuffer=Vervet / ATI Experimental Chameleon Boot - MultiBeast 3.3.0 - GraphicsEnabler=Yes - 64 bit=YES!! |
| Gigabyte | 5870 ATI Radeon HD GV-R587OC-1GD | Yes | iBoot ATI 5XXX-3 + GraphicsEnabler=No. DVI, HDMI work great / Experimental ATI Chameleon + Graphics Enabler = Yes. Works in 64 bit mode |
| Gigabyte | 6850 AMD Radeon HD GV-R685OC-1GD | Yes | Device ID=0x6739, OSX 10.6.8/Lion, Chameleon v2.1svn r1713, DVI, HDMI , DP work great, GraphicsEnabler=Yes, <Ati Config> Framebuffer=Bulrushes; AtiPorts=4 64bits |
| Gigabyte | 6870 AMD Radeon HD GV-R687OC-1GD | Yes | Device ID=0x6738 OSX 10.6.7 Multibeast 3.4 iBoot Legacy MB ATI drivers & Andy's ATI patch Framebuffer=Duckweed |
| HIS | 4350 ATI Radeon HD | Yes | Device ID=0x954f Tested in Snow Leopard OSX 10.68 *combo update v.1.1 and Mac OSX Lion 10.7-10.7.2 using Multibeast 4.02KernelCache option "No". You have to add card DeviceID to Info.plist inside ATI4600Controller.kext as 0x954F1002 or you can copy from uploaded in this link and install ATY_Init.kext into /System/Library/Extensions. make sure npci=0x2000 is also inside yourorg.chameleon.Boot.plist example in this link. then put ATI4350.Fix.v2.kext from the zip files inside /Extra/Extension Do not forget always repair permissions before reboot. Use Kext utility appropriate with OSX will make it easier. *credits to alexmathayes.
After success loading with full acceleration, to make Lion boot faster with cache, type this command inside terminal , because if we useKernelCache option on org.chameleon.Boot.plist value into "Yes" it will not work. All VGA port working, VGA, DVI, HDMI *unless audio hdmi.
|
| HIS | 5770 ATI Radeon HD H577FK1GD - Juniper XT | Yes | iBoot 2.5.1 + Multibeast 2.3.0 + ATY_Init Vervet enabler + GraphicsEnabler=No. Dual DVI works. HDMI not tested. Display Port not tested. Also see this guide. |
| HIS | 4890 ATI Radeon HD 1GB DDR5 | Yes | Lion 10.7.0/10.7.2 UniBeast + QE/CI Patch by Netkas |
| HIS | 5870 ATI Radeon HD (Cypress) | Yes | Device ID=0x6898 OSX 10.7.2 Unibeast 1.0.0 Multibeast 4.1.0. Needs ATIConfig Uakari so dual monitors can work (with both DVI ports. HDMI not tested) |
| HIS | 6570 AMD Radeon HD 2GB | Yes | Lion with GE=Yes gives HDMI<->HDMI only (add AtiConfig=Muskgrass, AtiPorts=4 for DVI over HDMI port) |
| HIS | 6850 AMD Radeon HD H685QN1GD | Yes | (OS X 10.7.2/Lion; UniBeast 1.0.0 Multibeast 4.2.1) AtiConfig=Duckweed Display Port and upper DVI work properly, DVD Player, ripples in widgets; AtiConfig=Mangabey both DVI ports work (because card not recognized at all), ripple in widgets but no DVD Player; other ports not tested |
| HIS | 6870 AMD Radeon HD H687F1G2M | Yes | Device ID=0x6738 OSX 10.6.7 Multibeast ?.? iBoot ?.? Andy's ATI fix, Framebuffer=Duckweed |
| MSI | 5670 ATI Radeon HD R5670-PMD1G OC | Yes | Device ID=0x68D8 OSX 10.6.7 Multibeast 3.4 iBoot ?.? |
| MSI | 5870 ATI Radeon HD R5870-PM2D1G | Yes | Device ID=0x9898 OSX 10.6.7 Multibeast 3.4 iBoot ?.? |
| MSI | 5870 ATI Radeon HD R5870 Lightning II | Yes | Device ID=0x6898 OSX 10.6.7 Multibeast 3.4 for SB & ATI Framebuffer=Uakari |
| MSI | 6450 AMD Radeon HD R6450-MD1GD3 LP | Yes | Device ID=0x6779 OSX 10.6.7 Mutlibeast 3.6 iBoot ?.? Latest ATI6000Controler.kext. HDMI 1920x1080 DVI 1440x900. Chimera v1.3 + Graphics Enabler=Yes |
| MSI | 6850 AMD Radeon HD R6850 Cyclone 1GD5 Power Edition/OC | Yes | Works OOB. Second DVI doesn't work with GraphicsEnabler=Yes. To use the second DVI set GraphicsEnabler=No, but it makes some apps crash (like dvd player and some games). Haven't tested displayport or hdmi yet. Running 10.7.2, Multibeast 4.0.2, Chimera 1.5.4.
DSDT method works well with aticonfig=Gibba ,but not well with Duckweed or Bulrushes .
|
| MSI | 6870 AMD Radeon HD R6870 Twin Frozr II | Yes | Device ID=0x6738 OSX 10.6.7 Mutlibeast 3.4 iBoot ?.? using Framebuffer=Duckweed |
| PowerColor | 5770 ATI Radeon HD 1GB GDDR5 | Yes | iBoot ATI with GraphicsEnabler=Yes HDMI Works. DVI Works. No sound over HDMI. Runs in PCIe x8. OS X 10.6.7 64-bit and 32-bit work perfectly. |
| Powercolor | 5770 ATI Radeon HD AX5770 1GBD5-PPGV2 | Yes | Experimental ATI Chameleon/Chimera + Graphics Enabler = Yes. Works in 32/64 bit mode. Dual monitors = Yes, Multibeast 3.4-4.1 confirmed. OSX 10.6.7-OSX 10.7.2 |
| PowerColor | 6850 AMD Radeon HD - Fanless | Yes | Device ID=0x6739 OSX 10.6.8 and OSX 10.7.x. Solve mouse / cursor freezes and get dual DVI output with AtiConfig=Pithecia. GraphicsEnabler=No. |
| Powercolor | 6870 AMD Radeon HD AX6870 1GBD5-M2DH | Yes | Device ID=0x6738 OSX 10.6.7 Multibeast 3.4 iBoot ?.? |
| Sapphire | 4850 ATI Radeon HD 1GB DVI/VGA/HDMI | Yes | MultiBeast 2.5.1 Chemalon with ATI + Graphics Enabler=Yes + 10.6.5 Patched ATI 48XX kext, VGA 1650x1080, DVI 1920x1200 (QE/CI worked only after several reboots, also worked under 10.6.2 with appropriate kexts) |
| Sapphire | 4870 ATI Radeon HD 1GB Dual DVI | Yes | GraphicsEnabler=Yes with DSDT. Both DVI work (dual not tested). |
| Sapphire | 5450 ATI Radeon HD 1GB DDR3 HDMI | Yes | Only DVI tested, method removed from forum/in dispute |
| Sapphire | 5570 ATI Radeon HD | Yes | Device ID=0x68d9 OSX 10.6.7 Used Multibeast 3.7.3 and newest iBoot (as of 7/9/11) Upgraded from 10.6.0 to 16.6.7 using Combo update with on board graphics from i5 650 only. After upgrade, removed ACPI_SMC_PlatformPlugIn.kext (located in the IOPlatformFamilyPlugIn.kext folder), then Terminal command: sudo touch /System/Library/Extensions (password), then ran system utilities from Multibeast and rebooted from I-boot. Next installed Chimera v1.4.1, and run system utilities again, and reboot from hard disk. Was not necessary to modify com.apple.plist or enter device ID. Full QE/CI in 64 bit. |
| Sapphire | 5670 ATI Radeon HD 100287L | Yes | Device ID= 0x68d8 OSX 10.6.8 Used Multibeast 3.10.0. QE/CI are enabled (ioreg reports 'Baboon' framebuffer) and apps like DVD Player work. No manual kext edits necessary. |
| Sapphire | 5750 ATI Radeon HD 100284VXL | Yes | Device ID=0x68BE OSX 10.6.7 Multibeast 3.4 iBoot ?.? Chameleaon ATI experimental Successful if edit ATI5000Controler.kext to include the 0x68BE1002 ID / iBoot ATI 5XXX-3 + GraphicsEnabler=No. Dual DVI works. To add - I had to edit ATI5000controller.kext and ATIRadeonX3000.kext and add the 5750's DeviceID to the Kext to get it working |
| Sapphire | 5770 ATI Radeon HD 100283VX-2L | Yes | Device ID=0x68B8 OSX 10.6.7 Multibeast 3.4 using iBoot ATI + GraphicsEnabler=No. Dual DVI works. HDMI works fine. Display Port not tested. Must install multibeast with no graphics options first, reboot and then install graphics kexts. |
| Sapphire | 5850 ATI Radeon HD 100282XTREME | Yes | Device ID=0x6899 OSX 10.6.7 Multibeast 3.4 iBoot ?.? using Notshy's method Framebuffer=Uakari / iBoot 3.0 + MultiBeast 3.5.0 + Chameleon 2.0 RC5 r748 - ATI Experimental + GraphicsEnabler=Yes. 64-bit works. DVI works. HDMI not tested. DisplayPort not tested. |
| Sapphire | 5850 ATI Radeon HD Toxic 1GB GDDR5 | Yes | Custom Boot with kabyl boot file + Multibeast + GraphicsEnabler=Yes. Dual DVI works. HDMI works fine. Display Port not tested. Must install multibeast with no graphics options first, replace /boot with this! 64 bits working!. |
| Sapphire | 5850 ATI Radeon HD Xtreme 1GB GDDR5 DVI/HDMI/DisplayPort | No | Device ID=0x6889, DisplayPort untested, OS X 10.7.2, Chimera 1.6, GraphicsEnabler=No. Works: HDMI, DVI-Analg, Dual HDMI+DVI-Analog, Sleep/Wake, Starcraft 2 Demo. DOES NOT WORK: QE/CI, DVD Player, Ableton Live Demo |
| Sapphire | 5850 ATI Radeon HD Xtreme 1GB GDDR5 DVI/HDMI/DisplayPort | Yes | Device ID=0x6889, DisplayPort untested, OS X 10.7.2, Chimera 1.6, GraphicsEnabler=Yes. Works: HDMI, DVI-Analg, Dual HDMI+DVI-Analog, Sleep/Wake, Starcraft 2 Demo, DVD Player, Ableton Live Demo DOES NOT WORK: 3D Fullscreen slight tearing of image (like VSync was off), Always shows VGA Display as primary display (can be changed via OS X display preferences) |
| Sapphire | HD 5870 1GB GDDR5 | Yes | Device ID=0x6898 Everything works OOB with DVI/HDMI/DP on Lion, Chimera 1.9.1, MultiBeast 4.3.1, UniBeast 1.2.0. GraphicsEnabler=Yes. |
| Sapphire | 5870 ATI Radeon HD 100281VX-2SR | Yes | Device ID=0x6898 OSX 10.6.7 Multibeast 3.4 iBoot ?.? / iBoot ATI 5xxx Beta 3 + GraphicsEnabler=No. Dual DVI works. HDMI not tested. Display Port tested working w/ Apple 27". Must install multibeast with no graphics options first, reboot and then install Apple Graphics update. Also see this guide. |
| Sapphire | 6570 AMD Radeon HD 1Gb ddr3 | Yes | Work OOB without any changes. HDMI not tested |
| Sapphire | 6850 AMD Radeon HD 100315TXSR | Yes | Device ID=?X??? OSX 10.6.7 Multibeast ?.? iBoot ?.? |
| Sapphire | 6850 AMD Radeon HD | Yes | Everything works OOB, GraphicEnabler=No, 64 Bit. Got both DVIs working in dual screen, upper one with DVI/VGA Adapter. All Outputs are available, everything is detected and works very smooth :) 10.6.8, Chameleon 2.0 RC-5 |
| Sapphire | 6870 AMD Radeon HD 100314SR | Yes | Device ID-?X??? OSX 10.6.7 Multibeast 3.4 iBoot 2.7 using Andy's ATI patch Framebuffer=Duckweed/ Notshy's method Framebuffer=Duckweed |
| Sapphire | 6870 AMD Radeon HD 100314-2SR | Yes | Device ID-?X??? OSX 10.6.7 Multibeast ?.? iBoot ?.? |
| Sapphire | 6870 AMD Radeon HD 100314TXSR | Yes | Device ID=0x6738 OSX 10.6.7 Multibeast 3.4 iBoot ?.? |
| Sapphire | 6870 AMD Radeon HD 111790040R | Yes | Device ID=0x6738 OSX 10.6.7 Multibeast 3.4, Framebuffer=Duckweed. The second DVI port doesn't work with any of the 10.6.7 framebuffers, but mini displayport->DVI does. |
| VTX 3D | 5770 ATI Radeon HD PCI-E 1GB DDR5 | Yes | iBoot 3.0.4, Chimera 1.4.1, MultiBeast 3.7.2, UserDSDT Install, GraphicsEnabler=No, 64 bit=YES |
| XFX | 4870 ATI Radeon HD 1GB Dual DVI | Yes | GraphicsEnabler=Y with DSDT. Dual output not yet confirmed. |
| XFX | 4890 ATI Radeon HD 1GB Dual DVI | Yes | GraphicsEnabler=Y without DSDT. Dual confirmed. ATI 48xxInjector for Snow Leopard. QE/CI 48xx Patch for Lion |
| XFX | 5750 ATI Radeon HD HD-575X-ZNFC | Yes | Device ID=0x68BE OSX 10.6.7 Multibeast 3.4 iBoot ?.? |
| XFX | 5770 ATI Radeon HD HD-577A-ZNFC | Yes | Device ID=0x68B8 OSX 10.6.7 Multibeast X.X / Use Kabyl ATI Chameleon boot in MultiBeast 2.5.1 or above. arch=x86_64 + GraphicsEnabler=Yes. 64-bit works. DVI works. Dual DVI Works. Triple DVI/DVI/VGA (Display Port) works. Display Port works. Readthis Some users report that BIOS must be changed to an earlier version for later versions of Snow Leopard and Lion to boot: see this thread and this thread. |
| XFX | 5770 ATI Radeon HD HD-577X-ZMF3 | Yes | Device ID=0x68B8 OSX 10.6.7 Multibeast X.X arch=x86_64 + GraphicsEnabler=Yes. 64-bit works. DVI works. Mini-Display Port works. Works natively (mdp) w/ 27" Apple Cinema Display in 10.6.7 64-bit] |
| XFX | 5850 ATI Radeon HD HD585X-ZABC | Yes | Device ID=0x6899 OSX 10.6.7 Multibeast 3.4 iBoot ?.? |
| XFX | 5870 ATI Radeon HD HD-587X-ZNFC | Yes | Chameleon 2.0 RC5 - ATI Experimental (Kabyl boot file) + GraphicsEnabler=Yes. 64-bits. Dual DVI works. Other ports not tested. |
| XFX | 6850 ATI Radeon HD | Yes | Device ID=0x6739 OS X 10.7.1 GraphicsEnabler=Yes. Full acceleration and full res works on main monitor. System Preferences reports 4 displays but dual DVI doesn't work using the two built in DVI's. Dual display does work with a DisplayPort to DVI connector. |
| XFX | 6870 AMD Radeon HD HD-687A-ZNBC | Yes | Device ID=0x6738 OSX 10.6.8 Multibeast 3.8.0 iBoot 3.1.1 UserDSDT Install, 64-bit, card has two DVI, two mini DisplayPort and one HDMI, dual monitor support works using main DVI port and mini DisplayPort with DVI adaptor, dual DVI does NOT work. Three screens active using one DVI port, the HDMI port (with HDMI to DVI cable) and one miniDisplay port (using miniDisplay to DVI active adaptor StarTech.com MDP2DIVS) on 10.7.2. |
| XFX | 6870 AMD Radeon HD HD-687A-ZNFC | Yes | Device ID=?X??? OSX 10.6.7 Multibeast ?.? iBoot ?.? |
| XFX | 6870 AMD Radeon HD HD-687A-ZDFC | Yes | Device ID=0x6738 OSX 10.6.7 Multibeast 3.4 iBoot ?.? using Andy's ATI patch |
| XFX | 6870 AMD Radeon HD HD-687A-ZDFC | Yes | Device ID=0x6738,clean install from xMove Lion Installer partition with rBoot,full resolution already.After 10.7.0 install completed,installed latest Chimera and upgraded to 10.7.1,GPU correctly recognized and working at full rez booting from HDD with GE=Yes.So working OOB! alex_tirdea P.S.This is the Black Edition Dual Fan v2 ^^ |
| XFX | HD-687X-CNFC Radeon HD 6870 2GB | Yes | Works out of box with lion |
Laptop/Mobile
| Manufacturer | Model | QE/CI | Method / Notes |
|---|---|---|---|
| nVIDIA | GeForce GT 230M 1GB | Yes | GraphicsEnabler=Y with ATY_init kext / works on HP DV7 laptop |
| nVIDIA | GeForce 9300M GS 256mo | Yes | GraphicsEnabler=Y, laptop (Acer TM 7730G) |
| nVIDIA | NVS 3100M 512MB DDR3 | Yes | Out of Box with iBoot-Supported |
NVIDIA
Note: The 4xx series of NVIDIA graphics cards experiences random kernel panics and freezing in Mac OS X Snow Leopard. An update to Lion is recommended!
| Manufacturer | Model | QE/CI | Method / Notes |
|---|---|---|---|
| ASUS | EN6600/TD/256M/silencer geforce 6600 256MB | Yes | Working Out Of the Box with iboot (tested on 10.6), did not change anything and was instantly recognized(vga tested only). |
| ASUS | EN7300GT SILENT/HTD/256M | Yes | Working OOB with iboot, vga(d-sub) tested, fully recognized in 10.6.2(others not tested) |
| ASUS | ENGTX 470 1280MB 320-bit GDDR5 | Yes | DVI iBoot 2.6/OS X 10.6.6 updated using NVidia Quadro 4000 drivers |
| ASUS | ENGTX 480 1536MB GDDR5 | Yes | Both DVI tested OK / HDMI not tested / OS X 10.6.5+ with tonymacx86 nVidia Update / OS X 10.7 as in / GraphicsEnabler=Yes |
| ASUS | GeForce 210 1GB GDDR2 | Yes | EFI String in /Extra/com.apple.boot.plist, Remove NVEnabler kext, GraphicsEnabler=Yes. 10.6.4 with latest NVidia graphics update. Do NOT add device ID to NVDANV50Hal.kext and NVDAResman.kext, the device ID is nonstandard to GF210 (0x0a2310de instead of 0x0a6510de) and will only cause the kernel to panic. |
| ASUS | Geforce 210 1GB GDDR3 ( EN210 SILENT/DI/1GD3/V2(LP) ) | Yes | No EFI or Kext or Injector Needed, Fresh install Snow Leopard 10.6.8 updated to 10.7,10.7.1 (Lion) using graphics enabler=Yes. Voila all detected and working OOB. |
| ASUS | GeForce 7500 LE | Yes | NVenabler kext - iBoot v2.6, 10.6.3 |
| ASUS | GeForce 7600GT 256MB | Yes | NVEnabler.kext (tested over DVI up to 1920x1080x32) - 10.6.5 |
| ASUS | GeForce 8400GS 512MB Silent | Yes | Working out of the box - 10.6 - doing more tests later |
| ASUS | GeForce 9600GT 512Mb | Yes | NVenabler kext |
| ASUS | GeForce 9800GT 1GB | Yes | NVenabler kext |
| ASUS | GeForce EN8600GT Silent 256MB | Yes | Works with EFI string made with GfxUtil. No problems with dual monitors. 10.6.7 |
| ASUS | GeForce ENGT240 1GB DDR3 | Yes | Dual Display not tested - 64 bit graphics enabler. 10.6.7 |
| ASUS | GeForce ENGT240 512MB DDR5 | Yes | Dual Display good - NVEnabler, or 64 bit graphics enabler. Work from 10.6.3 upwards, black screen on 10.6.1 and 2 |
| ASUS | GeForce GTS 250 512M GDDR3 (ENGTS250) | Yes | Working OOB GraphicsEnabler=Yes - 10.6.5 (iBoot 2.5.2, 10.6.3 retail, then 10.6.5 ComboUpdate + MultiBeast). MultiDisplay, haven't tested HDMI. |
| ASUS | GTS 450 | Yes | Working Out Of the Box with iboot, GraphicsEnabler=Yes , DVI tested, HDMI not tested, lion 10.7.2 |
| BFG | GeForce 8800GTX 768MB | Yes | Lion 10.7.1 - GraphicsEnabler=Yes, removed GeForce7xxx.kext and NVDAResmanG7xxx.kext to prevent driver for older card being loaded. |
| BFG | GeForce GTX 260 896MB OC (Dual DVI version) | Yes | Working in 64bit with iboot + nvenabler from multibeast |
| EVGA | GeForce GTX 280 1024MB | Yes | |
| EVGA | Geforce 7800GT 256MB | Yes | GraphicsEnabler=Yes IBoot+ Multibeast 10.6.7 32 bit only dual DVI display. |
| EVGA | GeForce 8400GS 512MB (10de:06e4) | Yes | Working in 10.6.8 GraphicEnabler=Yes - Dual Display - Graphics Acelerator - All Resolution. Working 64 bits. |
| EVGA | GeForce 8400GS 512MB DDR3 Silent (0x10de:0x10c3) | Yes | Install official NVIDIA driver release Retail_256.02.25f1v1.dmg to enable dual monitor support (VGA/VGA adaptor/DVI) with full acceleration. HDMI also working. NOTE kernel panic on 10.6.3 install with MSI P55GD65 mainboard. Installed with older ASUS 128MB card then switched once install complete. |
| EVGA | GeForce 8800GT 1GB | Yes | GraphicsEnabler=Yes. Full DVI (Channel 1) + DVI or S-VIDEO (Channel 2). |
| EVGA | GeForce 9500GT 1GB | Yes | GraphicsEnabler=Yes 10.6.6 |
| EVGA | GeForce 9600GT 512MB | Yes | OOB with GraphicsEnabler=Yes | 10.6.1 - 10.6.4 | Dual DVI | Everything working | completely recognized |
| EVGA | GeForce 9800GT 1GB | Yes | GraphicsEnabler=Yes, and may possibly need to disable AppleUpstreamUserClient.kext if the mouse chokes. |
| EVGA | GeForce 9800GTX 512MB | Yes | 10.6.1 and earlier works OOB. Works in 10.6.2 with 10.6.1 drivers (NVDANV50Hal.kext & NVDAResman.kext). Skipped to 10.6.4 and boots, but gives black screen. Older drivers don't help. Seems to be HDCP issue with HDMI displays (VGA works fine). |
| EVGA | GeForce 9800GTX+ 512MB | Yes | GraphicsEnabler=Yes |
| EVGA | GeForce GT 240 1GB | Yes | Dual display (DVI & VGA) Remove NVEnabler & GraphicsEnabler=Yes 10.6.3 |
| EVGA | Geforce GT 430 1 Gb DDR3 01G-P3-1431-KR | Yes | On first start up use graphicsenabler=no , update to 10.6.8, use offical NVIDIA Graphics shown at tonmacx86. Dual screen supported, full support for full Hd monitor, Hdmi no tested, full memory supported |
| EVGA | GeForce GT 520 1024MB DDR3 01G-P3-1526-KR | Yes | Works well with 10.7.3- Tested up to 1280x1024 DVI dual monitors 32 bit. The card is recognized automatically. QE/CI works - chess works, translucent menu bar, and ripples around new widgets appear in the dashboard when not shown as a space in Mission Control. OpenGL works. OpenCL is not recognized in Lux Mark (I think this was broken in 10.7.3). Sleep/wake work well, although USB isn't recognized if you wake using a USB device. I used the Unibeast method to do a clean install. This is a great basic card for Lion if you don't need a lot of power for games. |
| EVGA | GeForce GT220 1GB DDR3 | Yes | 10.6.4 |
| EVGA | GeForce GTS 250 1GB | Yes | GraphicsEnabler=Yes 10.6.6 |
| EVGA | GeForce GTX 260+ 896MB | Yes | GraphicsEnable=Yes - (10.6.1 - 10.6.5) - Dual Display DVI works OOB |
| EVGA | GeForce GTX 275 896MB | Yes | Dual display (DVI & VGA) 10.6.3 |
| EVGA | GeForce GTX 285 1GB | Yes | Dual display (DVI & VGA) 10.6.3 with GraphicsEnabler=Yes, used updated 10.6.4 nvidia drivers |
| EVGA | GT 440 1024MB | Yes | Works on 10.6.7. Only one display tested. Shows 512MB. Used tonymacx86 NVIDIA Update and Chameleon 2.0 RC5 with GraphicsEnabler=Yes. See this forum topic |
| EVGA | GTX 460 1024MB | Yes | DeviceID=x0e22.Dual-Display DVI/Multibeast 4.2(Lion 10.7.2)/SLI bridged (ignored in OS X) with EFI injection. Fermi freezes fixed with macpro5,1 smbios and APGM edits [1]. Installed first with nvidia.com drivers on fresh 10.7.0, then cuda drivers, graphicsenabler=no, efi injection, combo update to 10.7.2. - Working on clean install of 10.7.3 unibeast, Z68 - BIOS set to "init first: PCIE x16" to get it booting from HDD, then multibeast 4.3.1 -> 10.7.2/10.7.3 CL Enabler, NVIDIA drivers Retail_270.00.00f01.dmg, cuda driver cudadriver-4.2.5-macos, recognized for hardware mercury engine in Adobe Premiere after using this hackhttp://www.studio1productions.com/Articles/PremiereCS5-faq.htm - two monitors, all resolutions, core / quartz working, isadora working! Sleep working too! |
| EVGA | GTX 470 1280mb | Yes | DVI/HDMI iBoot-GE/MultiBeast 3.0/tonymacx86 NVIDIA Update |
| EVGA | GTX 550 ti 1GB | Yes | Working OOB with GraphicsEnabler=Yes. Tested DVI. 1080p Lion 10.7.3 |
| Gainward | GeForce GTX 260 896MB GS | Yes | Dual DVI working OOB using iBoot and NVenabler with MultiBeast. |
| Gainward | Gainward GTX580 Phantom3 1536MB | Yes | Both DVI tested OK / HDMI not tested / OS X 10.7.0 Corei7 Hackintosh 10.7 Lion Performace Test |
| Gainward | 560Ti Phantom 2048MB | Yes | Works on OS X 10.7.0 Install method, Example, Required files |
| Gainward | GeForce 8800GT 512MB | Yes | GraphicsEnabler=Yes. QE/CI ok. Fullscreen 3D only with VSync and at OS X Desktop resolution. |
| Gainward | GeForce 9800GT 1GB Green Edition | Yes | GraphicsEnabler=Yes, DVI+VGA Dual working 10.6.6 |
| Gainward | GeForce GTS 250 Green Edition 1GB | Yes | GraphicsEnabler=Yes |
| Gainward | GeForce GTX 460 | Yes | dsdt.aml modified with MultiBeast, tonymacx86 Drivers and video loop (VLC) on background. |
| Gainward | GTX 285 | Yes | Card worked OOB iBootv3.1, SL 10.6.6 |
| Galaxy | GeForce 8400GS 512MB | Yes | 10.7.2: add 0x10c310de&0xffe0ffff to /System/Library/Extensions/NVDANV50Hal.kext/Contents/Info.plist as a string to the key IOPCIPrimaryMatch. May work for other GeForce 8400GS cards too |
| Galaxy | GeForce 9500GT 1GB | Yes | GraphicsEnabler=Yes with DSDT (tested with dual DVI @ 1080p) | 10.6.4 |
| Galaxy | GeForce GT 430 1024MB 128-bit DDR3 | Yes | VGA tested with iBoot and combo update to 10.6.8 Updated driver with current Quadro driver from nVidia. Full acceleration Full memory recognized. Tested Working In 64 bit Mode. Works OOB on Lion 10.7.3; Individual ports work, VGA+HDMI tested, VGA+DVI does NOT work. |
| Galaxy | GeForce GT 440 1GB DDR3 | Yes | Only Tested DVI and HDMI. Almost Fully working, only no sound from HDMI. GraphicsEnabler=Yes, running chameleon v2.1VS r1817. Recognizes full 1024MB. Lion 10.7.3 |
| Galaxy | GeForce GTX 460 768 MB | Yes | Works with dual-monitors (one DVI and one VGA). Installed official NVIDIA Graphics drivers (tonymacx86 NVIDIA Update works too), NVEnabler (available in Multibeast 3.7.2), and 32-bit Boot Screen. The monitor connected to the DVI port occasionally displays static for 5-10 seconds after turning on. |
| Gigabyte | GeForce GTS 250 OC 1GB ver.2.0 | Yes | Working with NVenabler 64.kext, Graphics Enabler=Yes or EFI String, dual display works (DVI2DVI, HDMI2DVI or D-Sub2D-Sub) works, 10.6.0 - 10.6.4. Edit: HDMI works with some limitations, can't be hot plugged. |
| Gigabyte | GeForce 7300 GT 256MB | Yes | Working OOB with 10.6.3 and Snow Leopard Graphics Update as well as 10.6.5 (tested with DVI + D-Sub) |
| Gigabyte | GeForce 8600GT 256MB | Yes | NVEnabler 64.kext (tested over DVI up to 1680x1050x32) - 10.6.4 |
| Gigabyte | GeForce 8600GT 256MB | Yes | NVEnabler 64.kext (tested over DVI up to 1920x1280x32) - 10.6.2, multiple monitors working with full Q |
| Gigabyte | Geforce 8600GTS | Yes | GraphicsEnabler=Yes, Dual Monitors Working | 10.6.3 |
| Gigabyte | GeForce 9800GT 1GB Silent Cell GV-N98TSL-1GI | Yes | Dual display (DVI & VGA) works OOB in 10.6.2 and 10.6.3 with GraphicsEnabler=Yes; Seems to be HDCP issue with HDMI displays (VGA works fine) in 10.6.4; DVI works in 10.6.6 |
| Gigabyte | GeForce GT 240 1GB GDDR5 Silent | Yes | Works in 10.6.7. Installed Chameleon 2.0 RC5 from Multibeast, tonymacx86 NVIDIA Update and applied "PCI Root ID Fix for Chameleon" in Multibeast. See this forum topic;. |
| Gigabyte | GeForce GTS 250 1GB | Yes | Tested on OSX 10.6.3 (iBoot+Multibeast). Graphics work out of the box running with a Cinema HD 23" with DVI. |
| Gigabyte | GeForce GTX 570 1280MB | Yes | DVI tested, with full QE/CI, OpenCL and CUDA on OS X 10.7.2 / INSTRUCTIONS: Duplicate the "NVDAGF100Hal.kext" in S/L/E, then show package contents -> contents -> info.plist and add this line in the "IOPCI Primary Match section": "0x108110de&0xffe0ffff" (remove quotes). Reinstall the edited kext with Kext Utility (rebuild kexts... etc) and reboot to get QE/CI. Install the "NVIDIA Fermi OpenCL enabler" option in MultiBeast - Lion Edition to get OpenCL, and download the official CUDA drivers from the NVIDIA website: Mac Driver Archive Also, delete the Works like a charm... three days and no kernel panics. Also, remove AppleGraphicsPowerManagement.kext to achieve full graphics power. GraphicsEnabler=Yes, but leave Graphics Mode disabled to avoid 3D apps to crash. |
| Gigabyte | GT240 1GB GDDR5 | yes | nvenabler,Tonymac nvidia update ,10.6.6. |
| Maxsun | GeForce GTX460 768MB | Yes | Working OOB with 10.7.2 (not tested D-Sub yet) |
| MSI | GeForce GTS 250 TwinFrozr OC 1GB | Yes | Both DVI ports work out of the box with GraphicsEnabler; disable AppleUpstreamUserClient.kext to fix skipping mouse issues. DSDT edit required for correct GPU name in System Profiler, although some applications (Photoshop CS5) recognize the model without edits. Occasional "static" lasting up to 20 seconds on one screen after display wake. |
| MSI | Cyclone GTX 460 1024MB | Yes | Dual-Display DVI/Multibeast 3.3/tonymacx86 NVIDIA Update |
| MSI | GeForce 210 1GB DDR3 | Yes | GraphicsEnabler=No, With EFI String. 10.6.8 and 10.7 working. |
| MSI | Geforce 7950GT 256MB | Yes | Use 32 bits Apple boot screen option on Lion 10.7.2 and up. |
| MSI | GeForce 8400GS 256MB | Yes | Must use 'GraphicsEnabler=Yes' and add vendor code to proper kext. Select 'Show package contents' of NVAND50Hal.kext and edit Info.plist as root - under IOPCIPrimaryMatch key, add string 0x10c310de&0xfff0ffff as first line. Works with both DVI and VGA up to 1900x1200x32 - 10.7.2 |
| MSI | GeForce 8800GTS 320MB | Yes | GraphicsEnabler=Yes. Dual DVI is OK |
| MSI | GeForce 9800GT 1GB | Yes | NVenabler kext. 1900x1200. Still need to test dual monitors. | 10.6.4 |
| MSI | GeForce N210 512MB DDR2 (N210-D512D2) | Yes | 10.7 and 10.7.2 Full support without mod |
| nVidia (OEM HP) | GeForce GTX 260 1792MB | Yes | boot with GraphicsEnabler=No add device ID in NVDAResman.kext & NVDANV50Hal.kext then change to GraphicsEnabler=Yes |
| nVidia | GeForce 7600GS 256MB | Yes | NVEnabler.kext (tested over DVI up to 1920x1080x32 + 1400 x 1050x32 dual display) - 32 bit only 10.6.8 |
| nVidia | GeForce 9800GT 1GB | Yes | NVenabler kext |
| nVidia | GeForce Go 7300 | Yes | Working out of the box with (IBoot+ Multibeast). Tested on 10.6.2 and currently 10.6.4 | 10.6.4 |
| nVidia | Quadro 4000 | Yes | The latest Quadro NVIDIA Driver |
| Palit | GeForce GTS 250 1GB DDR3 | Yes | GraphicsEnabler=Yes (tested on 10.7.3) |
| Pegatron/Dell/ASUS-Offbrand | GeForce GT220 1024 MB | Yes | Using Chameleon/Chimera GraphicsEnabler=Yes VBIOS=Yes NvidiaBios=Yes with bios.rom dumped from windows using NVFLASH. Rename bios to XXXX_XXXX.rom using the first XXXX as VendorID and the second XXXX as DeviceID. |
| PNY | Geforce 210 256MB | Yes | EFI strings in com.apple.boot.plist, add device ID in NVDAResman.kext & NVDANV50Hal.kext | 10.6.4 |
| PNY | GeForce 450 1GB DDR5 | Yes | Ports fully working DVI/DVI/HDMI - Requires Chameleon 2.0 RC5 Prerelease r643 or higher, 10.6.5, and tonymacx86 NVIDIA Update |
| PNY | GeForce 9800GT EE 512MB | Yes | GraphicsEnabler=Yes with DSDT; Seems to be HDCP issue with HDMI displays in 10.6.4 and above; VGA works fine |
| PNY | Quadro FX 1500 256MB | Yes | GraphicsEnabler=Yes 10.6.4 |
| PNY | Quadro NVS 290 256MB | Yes | Dual display DVI/DVI GraphicsEnabler=Yes 10.6.8 & 10.7.1 |
| SPARKLE | GeForce 8400GS 512MB (10de:06e4) | Yes | Working OOB with GraphicsEnabler=Yes - 10.6.4 |
| SPARKLE | GeForce 9400GT 1GB | Yes | NVenabler + 10.6.1 graphics kexts in 10.6.2, 10.6.3 still having issues with multiple monitors. |
| SPARKLE | GeForce 9800GTX+ 1Gb | Yes | NVenabler kext |
| SPARKLE | Geforce GT 430 1280mb | Yes | DVI/HDMI iBoot-GE/MultiBeast 3.0/tonymacx86 NVIDIA Update + vbios + natit.kext 10.6.7 |
| SPARKLE | GeForce GT220 1GB DDR3 | Yes | GraphicsEnabler=No, install NVEnabler 64 kext. Tested VGA, DVI and HDMI. 10.6.8 and 10.7 working. |
| SPARKLE | GeForce GTX 260+ 896MB | Yes | GraphicsEnabler=Yes | 10.6.1 - 10.6.8 | Dual Display (DVI) |
| Twintech | GeForce GTX 285 1024MB | Yes | OOB (iBoot+Multibeast) OSX 10.6.3 / 10.6.4 + updated nVidia drivers 19.5.8f03 |
| Twintech | GeForce 8400GS 256MB (10C3) | Yes | GraphicsEnabler=Yes & Edit NVDANV50Hal.kext and in IOPCIPrimaryMatch key, add device id 0x10c310de - 10.6.5 |
| XFX | GeForce 8500GT Fanless 512MB | Yes | Working OOB with GraphicsEnabler=Yes - 10.6.8 |
| XFX | GeForce GT 240 1GB DDR3 | Yes | Working OOB with GraphicsEnabler=Yes - 10.6.8 |
| XFX | GeForce GTS 250 1GB | Yes | 10.6.4 with graphics enabled via DSDT |
| XFX | GeForce GTS 250 1GB | Yes | OOB with iBoot supported installing 10.6.3 Retail Disc + GraphicsEnabler=Yes |
| XFX | GeForce GTS 250 512MB DDR3 | Yes | GraphicsEnabler=Yes and NVenabler 64.kext |
| XFX | Geforece 9400GT 512MB | Yes | Working OOB with unibeast from retail. All resolutions available, DVI and VGA working. Dual monitors working. 10.7.0 and 10.7.3 after combo update |
| Zotac | GeForce 8400GS 512MB | Yes | Working OOB with GraphicsEnabler=Yes - 10.6.8 and 10.7.2 |
| Zotac | GeForce 9500GT 1GB | Yes | GraphicsEnabler=Yes 10.7.3 installed via UniBeast, works OOB (tested both DVI and HDMI @ 1920x1080 aka 1080p) |
| Zotac | GeForce 9600 GSO 512MB and 1GB | Yes | GraphicsEnabler=Yes | 10.6.4, 10.7.2 OK |
| Zotac | GeForce 9800GT 1GB | Yes | GraphicsEnabler=Yes, DVI or VGA, DVI+VGA Not Tested |
| Zotac | GeForce GT 520 1024MB 128-bit DDR3 | Yes | Only needed GraphicsEnabler=Yes. Vendor already supported by NVAND100Hal.kext in IOPCIPrimaryMatch key. Tested up to 1900x1200x32 DVI & VGA. HDMI untested. 10.7.2 |
| Zotac | GeForce GT440 1GB DDR3 | Yes | Both DVI ports work, fully recognized after Multibeast 4.2 update but only recognized 512MB before update |
| Zotac | GeForce GTS 450 Amp! 1024MB DDR5 | Yes | Installed official NVIDIA Graphics drivers & tonymacx86 NVIDIA Update & CUDA. Requires Chameleon 2.0 RC5 and NVEnabler and 10.6.8. Tested HDMI 1600 X 900. |
| Zotac | Zotac ZT-95TEK2M-FSL GeForce 9500GT 1GB | Yes | Working OOB with Chimera 1.7 and Lion 10.7.2/10.7.3 at 1080p on HDMI (DVI/VGA untested). |
No comments:
Post a Comment