Boot Flag yang boleh di gunakan .

Chimera Boot Options

DropSSDT=Yes | No

Skip the SSDT tables while relocating the ACPI tables [Default No]

DSDT=<file>

Use an alternate DSDT.aml file [Defaults /DSDT.aml /Extra/DSDT.aml bt(0,0)/Extra/DSDT.aml]

RestartFix=Yes | No

If disabled, no FACP patch will be done at boot time. [Default Yes]

CSTUsingSystemIO=Yes | No

GenerateCStates=Yes | No

Enable auto generation of processor idle sleep states [Default Yes]

GeneratePStates=Yes | No

Enable auto generation of processor power performance states [Default Yes]

EnableC2State=Yes | No

Enable specific Processor power state, C2 [Default No]

EnableC3State=Yes | No

Enable specific Processor power state, C3 [Default No]

EnableC4State=Yes | No

Enable specific Processor power state, C4 [Default No]

Wake=Yes | No

Disable wake up after hibernation [Default Yes]

ForceWake=Yes | No

Force using the sleepimage [Default No]

WakeImage=<file>

Use an alternate sleepimage file. [Default /private/var/vm/sleepimage]

busratio=<n>

Force busratio multiplier, such as CPUFreq=FSB freq x busratio

device-properties

Sets additional device properties like gfx card efi injection, network

"Default Partition"=hd(<x>,<y>) | <uuid> | <label>

Sets the default boot partition, Specified as a disk/partition pair, an uuid, or a label enclosed in quotes [No default]

"Hide Partition"="<partition>[;<partition2>...]"

Remove unwanted partition(s) from the boot menu. Specified, possibly multiple times, as hd(x,y), an uuid or label enclosed in quotes [No default]

"Rename Partition"="<partition> <alias>[;<partition2> <alias2>...]"

Rename partition(s) for the boot menu. Where partition is hd(x,y), uuid or label enclosed in quotes. The alias can optionally be quoted too. [No default]

SMBIOS=<file>

Use an alternate SMBIOS.plist file [Defaults /Extra/SMBIOS.plist bt(0,0)/Extra/SMBIOS.plist]

SMBIOSdefaults=Yes | No

Don't use the default values for smbios.plist [Default No]

SystemId=<uuid>

Manually set the system id uuid, overriding SMuuid in smbios config [No Default]

SystemType=<0-6>

Set the system type [Default 1]

UseMemDetect=Yes | No

PCIRootUID=0 | 1

Use an alternate value for PciRoot [Default 0]

AtiPorts=<0-6>

Change the number of graphics ports reported to OSX

AtiConfig=<framebuffer_personality>

Use a different framebuffer personality [No default]

UseAtiROM=Yes | No

Use an alternate Ati ROM image with path /Extra/<vendorid>_<devid>_<subsysid>.rom [Default No]

ATYbinimage=<file>

UseNvidiaROM=Yes | No

Use an alternate Nvidia ROM image with path /Extra/<vendorid>_<devid>.rom [Default No]

VBIOS=Yes | No

Inject NVIDIA VBIOS into device-properties [Default No]

display_0

display_1

EthernetBuiltIn=Yes | No

Automatic device-properties generation for ethernet interfaces [Default Yes]

GraphicsEnabler=Yes | No

Automatic device-properties generation for gfx cards [Default Yes]

ForceHPET=Yes | No

Force Enable HPET [Default No]

md0=<file>

Load raw img file into memory for use as XNU's md0 ramdisk [Default /Extra/Postboot.img]

USBBusFix=Yes | No

Enable all of the USB fixes [Default No]

EHCIacquire=Yes | No

Enable the EHCI fix [Default No]

UHCIreset=Yes | No

Enable the UHCI fix [Default No]

USBLegacyOff=Yes | No

Enable the USB Legacy fix [Default No]

EHCIhard=Yes | No

Kernel Flags

cpus=<n>

Force physical cpus count (all cores in all cpus), use only if autodetection doesn't work

darkwake=0 | 1

npci=0x<hex><hex><hex><hex>

Governs the initialization order and method of the PCI bus [Default 0x3000]

AHCIDisk=<n>

Increases AHCI debugging level, usually "1" when OS X boots too quickly [Default 0]

dart=0 | 1

Enables or disables extended memory mapping [Default 0]

nv_disable=0 | 1

Disables QE/CI on nVidia graphics cards [Default 0]

rtc=<0-7>

Real Time Clock debugging level, use 7 for an RTC dump to the kernel log